Komfovent DOMEKT REGO 400VE-B Manuel D'installation Et De Maintenance page 23

Insert rotor by its correct side; put on protective gaskets to their places (12 Picture).
Then electric heater is connected (13 Picture), cables must be carefully connected and fixed to appropriate
places. Do not forget to screw on grounding wires and make connections in indicated places.
Picture 14 shows unit from right-hand inspection side.
UAB AMALVA we reserve the right to make changes without prior notice
When changing inspection sides, be sure fans' connecting plugs are not
counterchanged. Fans are connected by the same connections. In case if
unit is right-hand side, fans wires are crossed over in rotary heat exchan-
ger's electronics place. Also by crossing the wires, correct air temperature
sensor position will be achieved.
12 Picture
13 Picture
14 Picture
23