Installation - Komfovent DOMEKT REGO 400VE-B Manuel D'installation Et De Maintenance

EN

INSTALLATION

Unit Inspection
Before installing the unit, inspection must be carried out. Unit has removable panels from its both sides (4 Picture).
All internal unit components can be extracted from inspection side. After choosing desired inspection side, it is ne-
cessary to check if rotary heat exchanger, electric heater and automatics box are positioned correctly. Rotary heat
exchanger and automatics box are maintained from inspection side. Picture 4 shows unit with left-hand inspec-
tion side. To get unit with right-hand inspection side, internal unit elements must be turned round. Remove both
unit's panels, which afterwards must be counterchanged to have possibility of other side inspection. Start with
electric heater (5 Picture). After removing the cover of the electric heater, electrical connection with the rotor must
be disconnected.
Taking off the switch from the unit it is needed to take it apart from each other and check if the contacts are fouled.
Afterwards electric heater may be extracted, turned round and put in by its other side (6 Picture). Then rotary
heat exchanger and automatics box must be turned round being already disconnected from all connections and
with unscrewed grounding wires (7 Picture)
20
UAB AMALVA we reserve the right to make changes without prior notice
4 Picture
unplug
plug
5 Picture