Technical Precautions - Aiphone JP-DA Manuel D'installation

WIRING
JP-DA JP-DV JP-DVF

TECHNICAL PRECAUTIONS

Door station is weather resistant. However, do not spray high pressure
•
water on door station directly. Unit trouble could result.
SPECIFICATIONS
Power supply
Operating temperature
Camera unit
Scanning lines
Minimum subject illumination
Dimensions JP-DA
JP-DV
JP-DVF
Flush mount back box
(JP-DVF)
Mass JP-DA
JP-DV
JP-DVF
Flush mount back box
(JP-DVF)
2
1A1
A1
A2 NP 1A2
•
Supplied from master station
- 10 - 60°C (+14°F - +140°F)
Complementary metal oxide semiconductor
(CMOS)
525 lines
5 Lux at 50 cm (1'6") distance
129 (H) x 97 (W) x 30.5 (D) (mm)
5-1/8 (H) x 3-7/8 (W) x 1-3/16 (D) (inches)
173 (H) x 98 (W) x 27.1 (D) (mm)
6-13/16 (H) x 3-7/8 (W) x 1-1/16 (D) (inches)
209 (H) x 135 (W) x exposed area 5.6 (D) (mm)
8-1/4 (H) x 5-5/16 (W) x 7/32 (D) (inches)
180 (H) x 110 (W) x 45 (D) (mm)
7-3/32 (H) x 4-3/8 (W) x 1-25/32 (D) (inches)
Approx. 170 g (0.37 lbs.)
Approx. 650 g (1.43 lbs.)
Approx. 570 g (1.26 lbs.)
Approx. 450 g (1.0 lbs.)
5
JP-4MED
Cleaning:
Clean units with a soft cloth and gentle cleaner. Do not spray cleaner
◆
directly on unit. Do not use an abrasive cleanser or cloth.
Wipe away dirt from the lens softly with a soft cloth. Observe the
◆
following points for lens care.
- Take care not to scratch the lens.
- Do not use organic solvents other than isopropyl alcohol (IPA) and
methanol.
- Do not use thinner, benzene, etc. It may cause damage or
discoloration to the surface of the unit.
NP: Non-polarized