Getting started
For the best performance place your Dyson AM10
humidifier on the floor in the corner of the room, facing
into the centre. It should be at least 1m from any wall.
To avoid a cooling effect while humidifying, the unit
should be at least 1m from any people.
1
Remove the tape, unscrew the cap and
fill the tank to the top. Replace the cap
and screw until hand tight.
10
2
Place the tank on top of the base.
Ensure the base is on a level surface,
otherwise the Dyson AM10 humidifier
will not operate.
3
Place the loop amplifier on top of the
tank. Push down until you hear a click.
Remote control docks magnetically.
Attach the remote control to the top of
the Dyson AM10 humidifier with the
buttons facing down.