Function „Sd Overwrite - Renkforce 808578 Notice D'emploi

Function „SD overwrite"
For a full memory card, no new recording can be performed and the memory card must be replaced with a
new, empty one (or the data on the memory card must be recopied to a computer).
If desired, an overwriting function can be activated, however. The respective oldest recording is then
replaced by the new one.
Proceed as follows:
• Use the buttons „4" and „6" to choose the submenu „SD Overwrite" and then push the button „PLAY/
ENTER" on the DVR or the button „
• Use the buttons „4" and „6" to switch between „YES" (overwriting function on) and „NO" (overwriting
function off).
• Confirm selection with the button „PLAY/ENTER" on the DVR or the button „
rol.
• Push the button „MENU/ESC" on the DVR or the button „MENU" on the IR remote control repeatedly to
return to the respective previous menu or leave the OSD menu.
" on the IR remote control.
" on the IR remote cont-
59