Function „Quality; Function „Volume - Renkforce 808578 Notice D'emploi

Function „Quality"
Here, you can set the resolution (VGA = 640 x 480 or QVGA = 320 x 240 pixels) in which the recordings on
the memory card are to take place.
Proceed as follows:
• Use the buttons „4" and „6" to choose the submenu „Quality" and then push the button „PLAY/ENTER"
on the DVR or the button „
• Use the buttons „4" and „6" to switch between „VGA" (= 640 x 480 pixels) and „QVGA" (= 320 x 240
pixels).
• Confirm selection with the button „PLAY/ENTER" on the DVR or the button „
rol.
• Push the button „MENU/ESC" on the DVR or the button „MENU" on the IR remote control repeatedly to
return to the respective previous menu or leave the OSD menu.
Function „Volume"
In this function, the volume for each radio camera/channel can be set separately. This may be required
depending on the assembly position of the radio camera or the microphone to keep the playback volume
about at the same height.
Proceed as follows:
• Use the buttons „4" and „6" to choose the submenu „Volume" and then push the button „PLAY/ENTER"
on the DVR or the button „
• Use the buttons „4" and „6" to pick one of the four channels now.
• Push the button „PLAY/ENTER" on the DVR or „
image of the respective channel on the connected screen/TV.
• Set the desired volume with the buttons „4" and „6".
• Push the button „MENU/ESC" on the DVR or the button „MENU" on the IR remote control repeatedly to
return to the respective previous menu or leave the OSD menu.
56
" on the IR remote control.
" on the IR remote control.
" on the IR remote control to display the camera
" on the IR remote cont-