Auxiliary Input Socket; Clock Setting - Sangean RCR-7WF Mode D'emploi

Auxiliary input socket

Your radio has a 3.5mm stereo jack socket for connection to external
audio sources. This can be configured to two sensitivity levels to suit
the output level of the connected device.
1. Connect an external audio source, such as an MP3 or CD player to
the Aux In socket on the back of the radio.
2. Turn on the radio and press the Band button on the front of the radio
until the display shows <Auxiliary Input>.
3. Now the radio will play the external audio sources.

Clock Setting

Setting the clock time
1. Long press Tine Set button until "Set Time/Date" is shown on
the display. (If it is not on the display, press Tuning+/- buttons until
"Set Time/Date " is shown).
2. Press Select button and then press Tuning+/- buttons to set
the hour.
3. Press Select button and then press Tuning+/- buttons to set
the minute.
4. Press Select button and then press Tuning+/- buttons to set
the date, month and year.
5. Press Select button to finish the setting.
Setting the clock format
The clock display can be set to 12 or 24 hour format. The selected
format is then also used when setting the alarms.
1. Long press the Tine Set button until <Set Time/Date> is shown on
the display.
2. Press Tuning+/- buttons until <Clock Format> is shown.
3. Press Select button and then press Tuning+/- buttons to select 12 or
24 hour.
4. Press Select button to confirm the setting.
GB
30