Headphone Socket; Line Out Socket (3.5Mm Jack); Specifications - Sangean RCR-7WF Mode D'emploi

Headphone socket

1. A 3.5mm Headphone Socket located on the rear of your radio is
provided for use with headphones. Inserting a plug automatically
mutes the internal loudspeaker.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause
hearing loss.

Line out socket (3.5mm Jack)

A 3.5mm Line Out socket located on the rear of your radio is provided
for connecting the audio signal to an external amplifier. Inserting an
audio cable into this socket will not mute the internal loudspeaker.
Set the volume control on the radio to minimum if desired.

Specifications

Power AC 100 ~ 240 volts, 50 ~ 60 Hz.
Connectivity Wired Ethernet Wi-Fi 10/100M bits/sec via RJ-45 802.11b
and 802.11g supported WEP and WPA encryption supported
Notice:
The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
GB
38