Mute Function; Auxiliary Input Socket; Headphone Socket - Sangean RCR-20 Mode D'emploi

Mute function

Press the Mute button on the remote control of your radio, it will mute the output from the
loudspeakers.
1. Press the Mute button to mute the sound output.
2. Press the Mute button again or one of the Volume buttons to un-mute the sound output.

Auxiliary input socket

A 3.5mm stereo Auxiliary Input socket is provided on the rear of your radio to permit an audio signal
to be fed into the unit from an external audio device such as iPod, MP3 or CD player.
1. Press the Standby (main power) button to switch on your radio.
2. Repeatedly press and release the SOURCE button until AUX IN is displayed.
3. Connect an external audio source (for example, iPod, MP3 or CD player) to the Auxiliary Input socket.
4. Adjust the volume setting on your iPod, MP3 or CD player to ensure an adequate signal level
from the player, and then use the Volume control on the radio as needed for comfortable listening.

Headphone socket

A 3.5mm Headphone socket located on the rear of your radio is provided for use with headphones.
Inserting headphones will automatically mute the internal loudspeaker. Please be aware that the
sensitivity of headphones can vary widely. We therefore recommend setting the volume to a low
level before connecting headphones to the radio.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause hearing loss.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
23