Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3
Put 1 litre of water in the salt container (only
for the first time).
Filling the rinse aid dispenser
1

Daily use

1. Open the water tap.
2. Press the on/off button to activate the ap-
pliance. Make sure that the appliance is in
setting mode, refer to "Setting and starting
a programme".
• If the salt indicator is on, fill the salt con-
tainer.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent tablets,
activate the Multitab option.
5. Set and start the correct programme for
the type of load and the degree of soil.
www.zanussi.com
4
2
1
2
3
To adjust the released quantity of rinse aid,
turn the selector between position 1 (lowest
quantity) and position 4 (highest quantity).
Using the detergent
1
1
2
4
1
2
2
45

Publicité

Table des Matières
loading

Table des Matières