White&Brown CUBA Mode D'emploi page 18

notice BL 2209: notice PC 481/482
- To make the cleaning easier, rinse the accessories soon after use, as soon as they are
withdrawn from the appliance.
- Handle blades with care. They are extremely sharp.
- Always clean the appliance after use.
MOTOR UNIT
- Always switch off and unplug from outlet after use and before cleaning operation.
- Never let the power unit, cable or plug get wet.
- Wipe the power unit with a damp cloth, then leave to air dry.
- Never use abrasives or immerse in water or other liquids.
BLENDER GLASS JUG
- Fill with warm water, fit the blender lid and the feeder cap, then switch on top speed for
20-30 seconds.
- Empty, then rinse. If it is still dirty, use a brush.
- Wipe, then leave to air-dry.
- Do not leave the blender in water to soak and do not leave water inside of it.
BLADES
- Remove the glass jug from its power unit, then turn it up side down.
- Unscrew the cup base and dismantle the blades, the sealing ring and the cup base.
- Clean them with hot water and dry thoroughly before reassembling.
- Put the sealing ring to the edge of the blades, and put them to the inner of the cup base.
- Mount the blender glass jug onto the cup base and turn the cup base unit in clockwise
direction.
1/02/11 15:24
CLEANING THE APPLIANCE
18
Page 5