White&Brown CUBA Mode D'emploi page 17

notice BL 2209: notice PC 481/482 1/02/11 15:24 Page 8
MOTOR UNIT (1)
Powerful and silent.
Selectors are used to set the motor speed (I medium speed, II high speed) or to stop the
appliance. Pulse position is used to operate by short pulses.
COVER (5)
This cover is constituted of two parts : a self adjusting cover (5), and a feeder cap (6). The
feeder cap is removable for use as a measuring cap and allows addition of other ingredients.
MIXING GLAS JUG (3)
This jug (3) is graduated for easy measurement and is moulded of heat and cold resistant
material. Handle and lip are designed for an easy serving.
ASSEMBLY PROCESSING
1. Check the power unit is unplugged.
2. Fit the blender glass jug onto the motor unit (1) and turn it clockwise until the jug is
bloqued.
3. When the jug is properly set, then plug the appliance.
4. Proceed reverse way to dismantle the appliance.
USE OF THE APPLIANCE
CLEAN AND DRY THOROUGHLY ALL PARTS OF THE APPLIANCE BEFORE THE FIRST USE.
1. Unplug from the outlet.
2. Put the ingredients into the jug.
3. Place the blender cover and feeder cap onto the jug.
4. Place properly the jug onto the power unit.
5. Connect the plug to the power supply outlet.
Select the desired.
CAUTION : ALWAYS HOLD THE JUG BY THE HANDLE DURING OPERATING.
17