Alecto ADB-17 Mode D'emploi page 34

REGISTRATION
Make sure both the bell pusher and
doorbell have full batteries. Now
simultaneously press the registration
button (rear of the doorbell) and
the bell pusher. Depending on the
programmed function, the doorbell will
start ringing, flashing or both.
The bell pusher is now registered on
the doorbell and is ready for use.
OPERATION
as a doorbell:
Mount the ADB-17 bell pusher near
the front door or another door. Don't
forget to register the ADB-17 before
installation.
as an additional doorbell:
Mount the ADB-17 bell pusher near
the front door or another door, next to
or underneath the existing installation.
Don't forget to register the ADB-17
before installation.
34