Num'axes PIE1037 Guide D'utilisation page 24

Cam PIR
Product information
MENU Exit
Other
Settings
Language
Date/Time
Date format
Time stamp
Battery Type
Frequency
Cycle recording
Password
Reset
Update
Product information
PIE1037 - Indice B – Octobre 2019
4G Other
OK Set
Programmable options (default settings in bold characters)
English / Français / Español / Deutsch / Italiano
Auto / Manual

Auto
Time Zone
HH:MM
UTC +/- 00:00
The camera will synchronise the date/time after you enter your time zone information.

Manual
Date
20/03/2019
Manually set date/time.
NOTE: it is important to set the date and time to ensure some functions work as expected (for example:
time stamp on the photos, sending time of the daily report, operation during defined time periods).
EU / US
EU (Europe): DD/MM/YY
US (United-States): MM/DD/YY
ON / OFF
Select "ON" if you want the date and time of the image capture imprinted on every photo. The current
temperature, moon phase, user set camera ID and GPS coordinates (if the "GPS" parameter is set to
ON) will also be imprinted on the still photos.
Alkaline / Ni-MH (nickel-metal hydride)
The device will perform better if you select the type of the batteries used in the camera.
You can purchase alkaline or rechargeable Ni-MH batteries at any time on www.numaxes.com.
50Hz / 60Hz
An improper setting may cause the camera screen to flicker.
OFF / ON
When the SD card will be full, the camera will continue to record photos/videos by deleting the oldest
photos/video.
Select "OFF" then press "OK" to deactivate the cycle recording function.
OFF / ON
Select "ON" then press "OK" to enable password protection for your camera (6 digits/alphabets long
password).
No / Yes
Select "Yes" to reset the camera back to the factory default settings.
Insert the SD card with the update firmware inside, then enter this menu to update the camera
firmware by confirming "Yes" in the options.
This parameter shows the following information:
Ver (firmware version in camera) / IMEI / MCU / MOD
Time
15:55:00
24/68