Working timer No 1
Working timer No 2
Cam
PIR
SIM Setup
Manual Setup
MMS
SMTP
FTP
Exit
MENU
Cam
PIR
Daily Report
SIM PIN
GPS
MENU
Exit
4G
Settings
SIM Setup
Manual Setup
PIE1037 - Indice B – Octobre 2019
Example: if Time Lapse is set to 00:30:00, the camera will automatically capture photos/videos every
30 minutes.
Configurable Time Lapse (HH:MM:SS): from 00:00:05 to 23:59:59.
OFF / ON
Each day, the camera will work only during the user set time period.
Select "ON" then press "OK" to set the start time and end time of the desired working period
(hour/minute).
Example: If the preset working timer 1 is 15:00-18:00; the camera will work only between 15h00
(03:00 PM) and 18h00 (06:00 PM) each day.
OFF / ON
Each day, the camera will work only during the user set time period.
Select "ON" then press "OK" to set the beginning time and end time (hour/minute).
Example: If the preset working timer 2 is 20:00-22:00; the camera will work only between 20h00
(08:00 PM) and 22h00 (10:00 PM) each day.
4G
Other
ON
D
ON
OK
Set
4G
Other
OFF
ON
OFF
OK
Set
Programmable options (default settings in bold characters)
Auto setup / Manual setup
The camera will automatically enter the MMS and 4G setups when the SIM card is inserted.
If "SIM Auto setup failed, enter setups manually" pops up on the screen, please switch "Auto setup" to
"Manual setup" mode, then enter the MMS and 4G setups in "Manual Setup".
MMS / 4G
Please enter the setups below manually if your local operator can't be automatically matched by the
camera itself.
MMS
Please contact your operator for MMSC/APN/Proxy/Port (Username and Password if required)
and enter this info manually.
NOTE 1: With MMS setups added, the camera can send photos to the pre-set phones/e-mails. If
the MMS information entered are false, then the phones/e-mail accounts will not be able to
receive photos from the camera.
NOTE 2: Email boxes receive photos from the camera via SMTP only when SMTP is ON and with
the correct SMTP information entered.
NOTE 3: The camera is not able to send pictures to e-mails via MMS when SMTP is ON.
4G
Enter your local operator's 4G APN, and corresponding Username and Password.
NOTE 1: Only with 4G setups added, can SMTP and FTP functions work.
NOTE 2: It's not a must to enter Username and Password of APN, but some operators may require
this password access to enable the 4G function. For details, please contact your local operator.
Cam
PIR
Recipients
Send format
SMTP/FTP photo options
Sendings/day
SMS control
MENU
Exit
4G
Other
Unlimited
1 time/day
OK
Set
21/68