Other Functions; Setting The Time - Pioneer SUPER TUNER III Mode D'emploi

Other Functions

Setting the Time

This is the mode for setting the time on the unit's clock display. (Refer to page 17 for
details concerning the clock display.)
1. Switch the sources OFF.
2. Enter the Time setting mode.
3. Select "Hour" or "Minute"
with the 2/3 buttons.
4. Set as desired time with the
5/∞ buttons.
As soon as you switch to "Minute",
the seconds start counting from 00.
5. Cancel the Time Setting mode.
Note:
• Holding down the AUDIO button for 2 seconds also cancels the Time Setting mode.
Hold for 2 seconds
16