System Requirements; Notes - Sony PCLK-MD2 Mode D'emploi

System requirements

The following hardware and software are necessary to use the MD
Editor 2 software.
π IBM PC/AT or compatibles (This software does not run on
π RAM Memory:
π Video board and display driver:
π Hard disc space: 20MB or more (When installing both MD Editor 2
π CD-ROM drive
π Serial port:
π OS :
π Video monitor:

Notes

• Set up the serial port that is to be used for this kit so that it is
unavailable to the other softwares.
• To verify that the serial ports of your computer are enabled, call the
vendor of your computer.
Macintosh.)
16MB or more (32MB or more is recommended.)
VGA (640 × 480 pixels), 65,536 colors or more
displayable.
and Label Maker.)
1 or more
Windows 95/Windows 98 (This software does not
run on Microsoft Windows 3.1 or Windows NT.)
VGA (640 × 480 pixels), 65,536 colors or more
displayable.
5 GB