Krüger & Matz KM1150 Mode D'emploi page 25

Owner's manual
17. Stop alarm ring:
When the alarm rings, press the corresponding
ALARM1 or ALARM2 buttons, the alarm stops but the
alarm settings remain.
View the alarm settings press the corresponding ALARM1
or ALARM2 buttons.
18. Setting the Sleep Timer:
You can set the unit to turn off automatically after a
certain period of time:
1. When the unit is turned on, press the SLEEP button
repeatedly to select a set period of time (in minutes):
OFF, 120, 90, 60, 45, 30, 15.
2. When sleep timer is activated, the "SLEEP" is displayed.
3. To deactivate sleep timer repeatedly press the SLEEP
button until „OFF" is displayed. When sleep timer is
deactivated, the "SLEEP" disappears.
19. Cleaning:
Clean this device with a soft, slightly damp cloth. Do
not use any type of abrasive pad or abrasive cleaning
solutions as these may damage the unit's surface.
20. Troubleshooting:
Problem:
No sound:
Timer does not work:
Clock/timer setting
has been erased:
Solution:
Adjust the volume.
Make sure, the clock is set correctly.
Switch on the timer again.
Power has been interrupted or the power
cord has been disconnected. Reset the
clock/timer.
25