General Operation - Krüger & Matz KM1150 Mode D'emploi

Owner's manual
1. Power On / Off:
To turn the device ON, press the
to the last selected source.
To switch the system to standby mode, press and hold the
button. The time (if set) will appear on the display panel.
2.Setting the Clock:
1. In standby mode, press and hold the SET button for 2
seconds. The [12 H] or [24 H] will begin to blink on the
display panel.
2. Set the 12/24 hour format with the
3. Press the SET button to confirm and move forward. The
hour digits begin to blink.
4. Repeat above steps 2-3 to set the hour, minute, month,
day, and year.
Note: If no button is pressed within 15 seconds, the unit exits
clock setting mode automatically.
3. Volume control:
Adjust volume level during play, press the VOL+/VOL-
buttons to increase/decrease the volume level.
4. Brightness control:
Press the BRIGHTNESS button repeatedly to select
different levels of display brightness.
5. Radio:
For optimal reception, fully extend and adjust the position
of the antenna.
II. GENERAL OPERATION
button, the unit switches
buttons.
19