Krüger & Matz KM1150 Mode D'emploi page 20

6. uning in to a Station:
1. When the device is ON, repeatedly press SOURCE button
to select the FM source.
2. Select a station using one of the following methods:
• Auto Tuning:
Press and hold the
second or more, the frequency changes down or up
automatically until a station is found.
• Manual Tuning:
Repeatedly press the
change the frequency until you find the station you want.
To select a preset radio station, repeatedly press the
or buttons to select the desired preset number. Its
band and frequency are displayed on the front panel. You
can program a maximum of 20 preset radio stations.
7. Automatically:
While in FM mode, press and hold the SET button for
two second or more to activate automatic program
mode. [AUTO] is displayed. All available stations are
programmed. The first programmed radio station is
broadcast automatically.
8. Manually:
1. Tune to a radio station.
2. Press the SET button to activate program mode. The
preset number will blink.
3. Repeatedly press the
number to this radio station.
4. Press the SET button again to store the station.
5. Repeat above steps 1 to 4 for each station you want to store.
20
buttons for one
or buttons to allocate a
Owner's manual
buttons to