Krüger & Matz KM1150 Mode D'emploi page 24

follow the instructions below:
1. Repeatedly press SOURCE button to select the AUDIO IN
source.
2. Connect the audio cable to the AUX IN jack (3.5mm)
on the back of the unit and the headphone jack on an
external device.
3. Start and control the music on your external device.
15. Set the alarm timer:
You can set two alarms which go off at different time.
1. Ensure that you have set the clock correctly.
2. Press and hold the ALARM1 or ALARM2 buttons for 2 seconds
or more, the
3. Set the hour with the
4. Press the SET button to confirm and the minute digits
begin to blink.
5. Repeat above steps 3-4 to set the minute, select whether
to ring alarm the whole week, on weekdays, or at
weekend and to set the alarm tone (FM, BUZZ or USB)
as well as its volume.
Note: If USB source is selected and the audio cannot be
played, BUZZ is activated automatically.
To deactivate or re-activate an alarm timer Press the
ALARM1 or ALARM2 buttons twice to activate alarm
function and again to deactivate it. Alarm icons on the
screen will appear/disappear accordingly.
16. Repeat alarm :
When the alarm rings, press the SNOOZE button, the
alarm repeats ringing 9 minutes later.
24
/
and the hour digits begin to blink.
or buttons.
Owner's manual