Operations - Yamaha SRT-1000 Mode D'emploi

Operations

Indicators
The indicators on the front panel flash or light up, to
indicate the operation and setting status.
In this manual, illustrations of the nine in-line indicators
are used for explanation.
: Off
: Lights up
: Flashes
(Example: When the STATUS indicator flashes and the TV indicator
lights up)
8
Input keys
Select an input source to be played back.
The indicator for the selected input source lights up.
(Example: when TV is selected)
TV ....................TV audio
BD/DVD ...........Audio from a device connected to
the BD/DVD input jack
COAXIAL.........Audio from a device connected to
the COAXIAL input jack
ANALOG .........Audio from a device connected to
the ANALOG input jack
BLUETOOTH ...Audio from a
device
HINT
• To play audio of the playback device connected to the TV or
to watch videos of the playback device, set the TV's input
source to the playback device.
• For details on connection, refer to "Listening to the
sound from a device" (p.12).
SUBWOOFER keys (+/–)
Adjust the volume of the subwoofer.
Volume down (–) Volume up (+)
VOLUME keys (+/–)
Adjust the volume of the unit.
Volume down (–) Volume up (+)
MUTE key
Mutes the audio output. Press the key again to unmute.
Flash (on mute)
★: Keys that require pressing for more than 3 seconds
1
BLUETOOTH STANDBY, AUDIO DELAY, SRT POSITION (L, C,
R), CH LEVEL, LEARN
connected
2
★
CH LEVEL key
While you listen to the test-tone, you can adjust
the volume level of each channel (p.11).
Remote control
signal transmitter
Transmits infrared signals.
★
★
★
★
3
★