QS II BASIC MODEL
US E R M AN UAL - EN GL IS H
The equipment is type tested by DEKRA EXAM GmbH, Dinnendahlstr. 9; 44809
Bochum, Germany. EC type examined (Directive 89/686/EEC) by DEKRA EXAM
GmbH, Dinnendahlstr. 9; 44809 Bochum, Germany.
This user manual applies to apparatuses consisting of the QS II Harness together with
the Plug-in type regulator unit.
1
SAFETY NOTICE
The product must only be used with:
Interspiro cylinders:
Interspiro full face masks:
ATTENTION! BREATHING APPARATUS WITH TWIN CYLINDER CONFIGURATIONS: SPIROLITE 6.7L, COMPOSITE
6.8L OR 9.0L AND STEEL CYLINDERS 4L OR 6L, EXCEEDS THE TOTAL WEIGHT LIMIT ACCORDING TO 6.6 IN EN
137:2006.
The product must only be used by personnel in good health and trained in the use of
respiratory protective equipment. Individuals with beards or large sideburns may not
obtain an adequate seal. The apparatus must be maintained, serviced and tested as
described in this user manual, Interspiro service manuals and Interspiro test instructions.
INTERSPIRO IS NOT RESPONSIBLE FOR
COMBINATIONS OF PRODUCTS, UNLESS PUT TO MARKET BY INTERSPIRO
CHANGES OR ADAPTATIONS MADE TO THE PRODUCT BY A THIRD PARTY
Spirolite 3.4L or 6.7L
Composite 6.8L or 9.0L
Steel 4L or 6L
S-series
Spiromatic-series
400-Series
7