WIKA TFT35 Mode D'emploi page 20

7. Dismounting, return and disposal
7.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of
EN
hazardous substances (acids, bases, solutions, etc.) and must therefore
be cleaned before being returned.
When returning the instrument, use the original packaging or a suitable
transport packaging.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with shock-absorbent material, in the
packaging.
Place shock-absorbent material evenly on all sides of the transport
packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring
instrument.
7.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an
environmentally compatible way and in accordance with the country-
specific waste disposal regulations.
20
WARNING!
Physical injuries and damage to property and the
environment through residual media
Residual media in the dismounted instrument can result in a
risk to persons, the environment and equipment.
▶
With hazardous substances, include the material safety
data sheet for the corresponding medium.
▶
Clean the instrument, see chapter 6.2 "Cleaning".
Information on returns can be found under the heading
"Service" on our local website.
WIKA operating instructions model TFT35