Tips And Advice; Cleaning And Maintenance; Safety Advice - Bartscher 700082G Mode D'emploi

Tips and advice

•
The bottle cooler is best for storing 0.75 litre bottles. The maximum capacity is
based on bottles of this size.
•
When filling the device, always ensure that the bottles do not block the door from
closing.
•
Placing a large number of bottles at once inside the device lengthens the time
needed for them to cool to the desired temperature.
•
To ensure optimal temperature selection, store bottles containing the same type of
beverage if possible.
•
A greater number of full bottles in the cabinet, as well as keeping the door open for a
long time, increase energy use. Do not overfill the device, and do not leave the door
open longer than necessary.
•
To minimize temperature loss in the device, the door should be kept open for the
shortest possible time. Do not open the door more frequently than necessary.
•
In the event of a power outage, avoid opening the door to prevent loss of cold air.
•
After a power outage or after removing the device's plug from its socket, do not
connect the device to a power source for at least 5 minutes.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!
- 28 -