Bartscher 700082G Mode D'emploi page 28

Temperature regulation
•
The temperature is set using the temperature dial, located inside the device at its top.
•
In order to set the temperature, turn the temperature dial clockwise to the desired
position (between 1 -7).
• Position "1" is the highest setting, and "7" the lowest temperature (temperature
values, see 4.2 "Technical information").
•
To turn the device off, turn the temperature regulator to the position marked "0".
•
When the device is turned on for the first time or has remained unused for a
longer period, set the temperature dial to "7" for at least 3-4 hours prior to
placing bottles inside the cooler. Next, set the desired temperature.
Shelves / grates
•
The bottle cooler is equipped with 5 shelves for bottles and 1 flat shelf. Shelves
for bottles and the flat shelf are removable.
•
The shelves for bottles
the slot located at the rear of the interior,
to avoid slipping when removing bottles.
To remove shelves for bottles, lift them
slightly.
•
The arch at the rear of the shelf for bottles
prevents bottles from touching the rear wall,
allowing for the free circulation of air
throughout the device.
③
•
The flat shelf
in other types of containers.
⑤
•
The grate at the bottom of the
device prevents bottles at the
bottom from rolling out when the
door is opened.
②
are mounted in
is intended for beverages
②
③
⑤
- 27 -