Operation - Bartscher 700082G Mode D'emploi

•
Do not place the device where humidity or temperature are high as the device may
be damaged.
•
Do not drill holes in the device nor mount other objects to it.
•
Do not store any heavy, poisonous or rusting objects.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.3 Operation

•
Before using the device and its equipment, wash with warm water and a mild
cleaning agent. Rinse with clean water, then dry thoroughly.
•
Before connecting the device to a power source leave the device upright for 4 hours.
•
Connect the device to a single grounded outlet.
Controls
Lighting
•
The device is equipped with an internal LED light and switch located inside the
device.
•
The internal light can be turned on (position ON) and off (position OFF) as
needed using the switch.
- 26 -
Temperature dial
Lighting switch
LED lighting