Landmann Grill Chef 0666 Instructions De Montage page 9

Assembly
CAUTION!
For your safety the screw heads should always
point outwards, otherwise there is a risk of
injury.
Only tighten all of the screw connections firmly
when you have finished assembly otherwise it
can result in undesired material stress.
1. Fit legs (H + I) to the fire bowl (E) using M6x30
bolts, washer Ø6xØ25 and washer Ø6xØ20. Pay
attention to correct position of the legs (H + I)
as shown in the drawing.
2. Fix shelf (J) between legs (H & I) using M5x30
bolts and nuts M5.
3. Fit axle (M) through holes of the wheel caps (N)
and assemble the wheels (L) on the axle (M) by
using look nuts M6.
4. Assemble pulling handle (F) to fire bowl (E)
using M5x10 bolts, washer Ø6 and nuts M5.
Attention: Washer Ø6 should be fixed from the
inside.
Information for safe operation of the
barbecue
The barbecue must be positioned on a stable and
secure surface when it is in use.
Do not use in enclosed areas or on covered
areas.
Only use safe lighting materials (such as
LANDMANN solid firelighters).
5. Assemble wind shield parts (C & D) to fire bowl
(E) using M5x10 bolts and nuts M5.
6. Fit the handles (C) for the cookin grill into the
fixtures of the cookin grill (B).
7. Place cooking grill (B) into position in the wind
shield (C & D)
WARNING!
The barbecue must be positioned on a stable
and secure surface when it is in use, otherwise
it may tip over.
The fuel container has a capacity of approximately 1,5 kg.
The barbecue should be heated up for approximately
30 minutes before it is used for the first time.
GRILLCHEF 9