Connection Variants; Overview Of The Connections - Schluter Systems LIPROTEC LT EBR 1 Notice D'utilisation

6.1 Connection variants

The components of the LIPROTEC system can be assembled
and connected in the following combinations:
One or more LED strips (LT ES 11 to LT ES 61),

connected to a power pack with an upstream light switch
(see the "Directions for use for LED strips", Fig. F)
One or more LED strips (LT ES 11 to LT ES 61,

LT ES 9), connected to a receiver for remote control,
with an upstream power pack and optional light switch
(see the "Directions for use for LED strips", Fig. E)
One or more LED strips (LT ES 11 to LT ES 61,

LT ES 9), connected to a building automation system
that takes over the power supply and control functions
(see the "Directions for use for LED strips", Fig. G)
The possible connections applicable to the existing
component are described below.

6.2 Overview of the connections

Type
Input 1
Input 2
Output 1
Output 2
Output 3
Bluetooth receiver directions for use
LTEBR1
Black (+)
White (-)
Black (+)
White (-),
max. 10 A
–
Connection
LTEBR4
Black (+)
White (-)
Black (+)
White (-),
max. 3.5 A
Green (-),
max. 2.0 A
EN
55