Connection - Schluter Systems LIPROTEC LT EBR 1 Notice D'utilisation

EN

Connection

Position the Bluetooth receiver at least 50 cm above the

floor of the room.
Ensure that the radio reception at the selected

installation location is not impeded by metal objects or
the mains cable.
Make sure that sufficient ventilation is provided.

Observe the minimum distances to the neighbouring

components (see the
pack
, fig. C).
Make sure the distance between the mains cable and

connection cable of the receiver or LED strips is as large
as possible (at least 5 cm) and mains and connection
cables are not laid in parallel.
6 Connection
There is a possibility of electrical shocks when working
on an energised power pack!
Electric shocks can lead to severe or deadly injuries.
Before working on the components, make sure the

power pack is not energised.
Do not connect the power pack to the mains

connection until all connection work has been
concluded.
54
Directions for using the power
DANGER
Bluetooth receiver directions for use