Alarm Functions - TFA 60.2532 Mode D'emploi

TFA_No. 60.2532_anl_09_16 20.09.2016
SIESTA – Radio-controlled alarm clock
• With this setting, you also select, if the time will be displayed in the 12 or 24 hour system. First, the hours will appear in
24- hour system then the hours will appears in 12-hour system (PM appears from 12 to 24 o'clock on the display).
• Press the MIN button to adjust the minutes.
• Slide the switch to the position AL ON or AL OFF, to exit the setting mode.
• On the display appears the adjusted time.
• By a successful reception of the DCF signal, the manually set time will be overwritten.
7.2 Setting of the alarm time
• Slide the switch to the position AL SET.
• The alarm time (default 7:00) will be flashing on the middle display.
• Press the HR button to adjust the hours.
• Press the MIN button to adjust the minutes.
• Slide the switch on the position AL ON, to activate the alarm function.
• The alarm symbol appears on the display.

7.3 Alarm functions

• When the adjusted alarm time is reached, the alarm will ring.
• The alarm symbol will be flashing.
26
09:54 Uhr Seite 14
SIESTA – Radio-controlled alarm clock
• The backlight turns on for a short time.
• The increasing alarm will automatically turn off a few minutes.
• Press any button to turn off the alarm sound or press the SNOOZE/LIGHT button and the snooze function will be activated.
• The alarm symbol and the snooze symbol disappear on the display.
• The alarm sound will be interrupted for five minutes.
• Press any button to turn off the snooze function.
• The snooze symbol will disappear.
• The alarm symbol stays on the display and the alarm time will be reactivated at the same time.
• Slide the switch to the position AL OFF, to turn off the alarm function.
• The alarm symbol will disappear.
7.4 Setting of the NAP function
• On the upper display (default 00) appears the adjusted time for the NAP function.
• Select with the 5, 15 or 30 button the time how long you want to sleep. With each further button operation the time will be
added (until 360 minutes).
• With the setting of the minutes the NAP function will be activated.
• With the CLEAR button you can delete the set time or stop the timer.
• An alarm sounds when the set time has elapsed.
27