Installation and Operating Instructions
PIN
Multiple security levels can be selected:
On/Off
The unit can be activated or deactivated without a password.
On/Off, Temp., Air flow
Enables the activation and deactivation of the unit, as well as setting of the
temperature and air flow without a password.
Temp., Air flow
Enables the setting of the temperature and airflow without a password.
Full
Allows no settings without a password.
User mode
The unit can be activated and deactivated and the temperature and airflow
can be set without a password.
Once the password has been entered, the unit can be fully controlled and
adjusted.
Service menu | 38 – BACnet
21 -
Network
23 -
User lock
38 - BACnet
48 -
Software reset
49 -
Other settings
The BACnet menu is used to set the system network communication
Service menu | 48 – Software reset
Rest software.
23 -
User lock
38 -
BACnet
48 - Software reset
49 -
Other settings
50 -
Factory reset
Decentralised ventilation unit – KWL
User security level
29
®
Yoga / KWL
®
Yoga Style
Service menu | 49 – Other settings
38 -
21 - Network
Network
48 -
User lock
23 - User lock
49 -
25 - Factory reset
Other settings
50 -
01 - Mode
Factory reset
01 -
Mode
15 - Modbus RTU
Activate/
deactivate
summer time
changeover
Service menu | 50 – Factory reset
48 -
Software reset
49 -
Other settings
50 -
Factory reset
01 -
Mode
02 -
Hw Setting
By pressing FACTORY SET ., the unit will be restored with factory settings .
The following parameters will not change:
– AQS sensor settings
– Ventilation mode
– HW settings
– Temperature sensor
– Modbus settings
Controller address
(when using 2 control-
lers on one unit)