During Operation; Interrupting Function; End Of Function - Teka TMW 18 BIG Mode D'emploi

During operation...

It is possible to change the operating time, the power level or the
function while the oven is functioning, by turning the respective
control.
It is possible to open the door of the oven at any moment while the
foods are being cooked. In this case:
THE PRODUCTION OF MICROWAVES IS AUTOMATICALLY
INTERRUPTED;
The grill switches off, but remains very hot;
The timer stops automatically, indicating the operating time
that is left.
If you wish, you may:
1. Move or turn the foods around to improve uniformity of the
heating process;
2. Select another function, placing the function selector in another
position;
3. Change the operating time that is left, by turning the Timer
Button.
Close the door again. The oven starts to function.

Interrupting function

To interrupt the functioning of the microwave, turn the Timer
Button to ZERO or open the door. If you wish to cancel the
cooking process, turn the Timer Button to ZERO and close the
door.
WARNING: When you finish using the oven, always turn the
Timer Button to zero, because otherwise the oven will start to
function when you close the door and may be damaged if it
functions when empty.

End of Function:

When the set time has elapsed, the oven beeps and the Timer
Button read ZERO.
EN
33