Domo DO7293S Mode D'emploi page 41

6. Replace the HEPA filter and holder in the canister. To do this, first turn the cover to the side.
CLEANING THE MACHINE
· Clean the side brushes, wheels, sensors and the contacts for charging the battery regularly with a soft
cloth.
· After numerous uses, the side brushes should be replaced. The maximum duration of the brushes is
approximately 12 months. The brushes and the machine are marked with L (left) and R (right); make
sure they match.
· Never submerge the machine in water!
· The sensors may not become wet.
CLEAN ROTATING FLOOR BRUSH
Open the cover of the floor brush. Wipe the cover clean with a soft cloth. Remove the rotating floor brush.
Rinse the brush under running water. Let it dry before putting it back in place.
STORAGE
If you do not use the device for a long period of time:
· Remove the batteries from the remote control
· Fully charge the battery, turn off the power switch, and store the device in a dry place
If the device has not been used for 3 months or more, charge the battery for 5 hours before using.
ERROR CODES
If the 'erro' code appears on the display while charging, make sure that the power switch is on.
For all other error codes, follow these steps:
1. Turn the power off using the power switch.
2. Clean the vacuum and all sensors with a dry, soft cloth.
3. Empty the canister.
4. Make sure that no objects are caught in the floor brush.
5. Place the vacuum on a solid surface.
6. Turn the power back on using the power switch.
If the vacuum still does not work, please contact the DOMO after-sales service.
www.domo-elektro.be
41
DO7293S