Domo DO7293S Mode D'emploi page 37

USE WITHOUT REMOTE CONTROL
· Press on the on/off touchscreen button for automatic cleaning. The vacuum cleaner will plot its own
path to vacuum the entire area, taking walls, obstacles and stairs into account.
· When the machine is finished vacuuming, it will automatically return to the charging station. If no
charging station is installed, the vacuum cleaner enters standby mode.
· It is also possible to allow the machine itself to stop cleaning. To do so, touch the on/off touchscreen
button. Turn the device off with the on switch on the side of the machine.
HOME: return to the charging station for re-charging
· If you wish to charge the vacuum cleaner during use, press the HOME button. The vacuum cleaner will
now automatically look for the charging station.
· PLEASE NOTE: it is possible that the vacuum cleaner cannot find the charging station because there
are too many obstacles around the charging station. Make sure that the free area around the charging
station is as large as possible.
· If the battery is empty, the vacuum cleaner will automatically return to the charging station.
PLAN: clock
· Press the plan button to set the clock.
· The hours on the display begin to flash. Set the hours by pressing the home button. Press the power
button to confirm.
· The minutes on the display begin to flash. Set the minutes by pressing the home button. Press the
power button to confirm.
· The home button's indicator light goes out and the plan button's light flashes. After 10 seconds, both
indicator lights turn on again and your settings are saved.
· Pressing the plan button during setup will return the device to standby mode and your settings will be
cancelled.
PLAN: timer
Switching on the timer
Use this button to let the robot vacuum cleaner vacuum automatically; you choose the daily starting time.
For example, if you set the timer to 9:35, the robot will start vacuuming every day at 9:35.
First, set the clock as described above.
· Press and hold the plan button for 5 seconds and then release.
· The hours on the display begin to flash. Set the hours by pressing the home button. Press the power
button to confirm.
· The minutes on the display begin to flash. Set the minutes by pressing the home button. Press the
power button to confirm.
· You'll hear a sound as confirmation. The timer is now set.
· Pressing the plan button during setup will return the device to standby mode and your settings will be
cancelled.
Turning off the timer
If you want to disable the programmed timer, proceed as follows:
· Press and hold the plan button for 5 seconds and then release.
· Set the timer to 00:00 as previously described.
· You'll hear a sound as confirmation. The timer is now switched off. The robot will no longer vacuum
automatically.
www.domo-elektro.be
37
DO7293S