Product Overview (01, 08); Approved Cutting Tools - AL-KO BC 223 B Mode D'emploi

GB
2.7

Product overview (01, 08)

BC 223 B (01)
No. Component
1 Spool head
2 Angular transmission
3 Guard plate with line cutter
4 Bike handle
5 Shaft
6 Combination handle with:
■
7 On/off switch for engine (START/
STOP)
■
8 Locking button
■
9 Throttle lever
10 Engine block with:
■
11 Air filter housing
■
12 Air filter screw
■
13 Fuel tank
■
14 Cap of the fuel tank
■
15 Starter handle
■
16 Spark plug cover
■
17 Choke lever
■
18 Housing flange
■
19 Primer
BC 223 L-S (08)
No. Component
1 Spool head
2 Drive shaft
3 Guard plate with line cutter
4 2-piece shaft
5 Loop handle with spacer
6 Combination handle with:
■
7 On/off switch (START/STOP)
■
8 Locking button
■
9 Throttle lever
10 Engine block with:
30
No. Component
■
11 Air filter housing
■
12 Air filter screw
■
13 Primer
■
14 Fuel tank
■
15 Cap of the fuel tank
■
16 Choke lever
■
17 Starter handle
■
18 Spark plug cover
■
19 Housing flange
2.8

Approved cutting tools

Only the OEM cutting tools listed here may be
used:
■
BC 223 B spool: article no. 112406
■
BC 223 L-S spool: article no. 112880
■
BC 223 B 3-toothed blade: article no. 112405
DANGER!
Danger from cutting tools!
Non-approved cutting tools (e.g. multi-
part metallic cutting tools with revolving
chains and blades) and damaged cutting
tools (e.g. cracks, spalling) can result in
very serious injuries or even death.
■
Use only the approved OEM cutting
tools.
■
Replace damaged cutting tools im-
mediately.
The use of non-approved cutting tools is contrary
to the intended use (see chapter 2.1 "Intended
use", page 28)!
Product description
BC 223 B | BC 223 L-S