Selecting The Display Mode - Sony ICD-R100 Mode D'emploi

Selecting the Display Mode

You can select the display mode for the stop, recording and playback
modes. (If the unit is left unoperated for more than 3 seconds in the stop
mode, the display will show the current time, regardless of the display
mode setting.)
Each time you press DISPLAY, the display mode will change as shown
below:
,
* The remaining recording time indication varies according to the recording
mode setting (SP or LP).
**If the clock has not been set, "-M--D--:--" will be displayed.
34
GB
DISPLAY
Counter:
Elapsed playback/
recording time in one
message
m
Remaining
recording time*:
m
Recorded date**:
The date and time the
current message was
recorded.