Table des Matières
Publicité
It will automatically assign a number which is displayed on the handset and must
be used for internal calls.
If the PIN code is incorrect, the handset returns to standby after 2 minutes. Try
registering again.
HOW TO CHANGE THE LANGUAGE
1. Press MENU. Repeatedly press the ∧ or ∨ key and choose <REGL COMB> by
pressing OK.
2. Repeatedly press the ∧ or ∨ key and select LANGUE by pressing OK.
3. Choose the desired language and press OK to confirm.
USING THE ANSWERING MACHINE (TAM)
This product can digitally record up to 60 minutes of message. As well as recording
incoming messages, you can record memos for other users.
You can operate your answering machine from the handset or base, or remotely from
other telephones.
You will need to set the correct date and time (if you have not already done so) so
that you will know when each message was received. If you subscribe to Caller
display service, the date and time would be set on the handset automatically. If you
need to set is manually, please reset it under HS SETTINGS. If "CL" displays on the
base LCD, it means the time hasn't been set yet, and you will not know the message
received time.
Switch the answering machine on/off
Using the base:
1. Press and hold the
ON: The base LCD display firstly displays "A1" or "A2", and then digits.
OFF: The base LCD display firstly displays "OF" and then"- -"
Using the handset:
2. Press
3. Press
4. Press
5. Press
Outgoing messages (OGMs)
The outgoing message is the message a caller first hears when the answering
machine picks up their call.
messages, OGM 1 is for answer & record and OGM 2 is for answer only, and you
can also record your own.
key to switch the answering machine ON or OFF
key, scroll ∧ or ∨ key to select TAM.
key, scroll ∧ or ∨ key to select TAM SETTINGS.
key, the display shows TAM ON/OFF.
key, the display shows ON. Press
This product has two pre-recorded outgoing
43
key to confirm.
Publicité
Table des Matières
