Installing The Telephone Base; Signal Strength - THOMSON Moovy+ TH-546DRBLK Manuel D'utilisation

• Do not immerse a battery in water and do not throw it in a fire.
• The socket-outlet shall be installed near the equipment and shall be easily
accessible.
• If the appliance is not use for a period of time, please unplug the adapter in order
to save electricity.
• The external flexible cable of the adapter cannot be replaced, If the cord is
destroyed, the adapter should be destroyed.
CAUTION
Please use the bundle adaptor for operates the device only. The adaptor model
number: GCE060050C
Failure to observe the correct polarity or voltage of the adapter may cause
damage to the telephone base.
For phone models TH-546DRBLK and TH-546DRGRY:
Adapter for the telephone base: GCE060050C
Input: 100-240V~ 50-60Hz 150mA
Output: DC 6V 500mA

Installing the telephone base

The telephone base should be placed at least 1 meter away from other electrical
appliances in order to avoid interference. The handset exchanges radio signals with
the telephone base. The strength of these signals depends on the position of the
base. You can obtain a stronger signal by placing the base higher.
Operating range of the handset
The operating range of your telephone is 300 meters outdoors without
obstructions between the telephone base and handset. Obstructions reduce the
operating range. When the telephone base is located indoors, while the handset is
indoors or outdoors, the operating range is reduced to 50 meters. Thick concrete
walls reduce the operating range significantly.

Signal strength

When the handset is within the operating range of the telephone base,
on the screen.
closer to the telephone base to turn off this indicator.
flashes when the handset is out of range. You should then get
35
appears