Functional Description; Intended Use; Product Features - Bosch PBS 75 A Notice Originale

OBJ_BUCH-601-002.book Page 15 Wednesday, August 19, 2009 8:40 AM
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Bosch Power Tools

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The machine is intended for dry sanding–with
high removal capacity–of wood, plastic, metal,
filler as well as varnished surfaces.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Auxiliary handle (insulated gripping surface)
2 Sanding belt*
3 Clamping lever for sanding belt
4 Thumbwheel for belt speed preselection
(PBS 75 AE)
5 On/Off switch
6 Lock-on button for On/Off switch
7 Dust box, complete (micro filtersystem)
8 Handle (insulated gripping surface)
9 Extraction adapter*
10 Extraction outlet
11 Latching lever for dust box
12 Filter element (micro filtersystem)
13 Adjustment knob for belt run
14 Protection cover
15 Dust passage
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
2 609 932 737 | (19.8.09)
English | 15