Burda io TERM2000 IP67 Mode D'emploi page 14

6. TIMER
6.1 Press the «MY» and Down buttons simultaneously until the lamp is ON/OFF in one cycle.
If the "timer" function was inactive, it is activated. If the "timer" function was active, it is deactivated.
6. TIMER
6.1 Press the «MY» and Down buttons simultaneously until the lamp is ON/OFF in one cycle.
If the "timer" function was inactive, it is activated. If the "timer" function was active, it is deactivated.
6.2. Subsequently after the 6.1, Short press the button "MY' and DOWN simultaneously
6.3. Subsequently after the process 6.2, press the button "MY' and DOWN approx. 2 seconds.
The lamp is ON/OFF In 1 cycle.
6.2. Subsequently after the 6.1, Short press the button "MY' and DOWN simultaneously
6.4. Press the button DOWN to set the timer in 3 hours, the button My to set the timer in
6.3. Subsequently after the process 6.2, press the button "MY' and DOWN approx. 2 seconds.
6 hours, and the button UP to set the timer in 12 hours.
The lamp is ON/OFF In 1 cycle.
6.5. The lamp is ON/OFF In 1 cycle.
6.4. Press the button DOWN to set the timer in 3 hours, the button My to set the timer in
6.6. Press the My button approx. 2 seconds.
6 hours, and the button UP to set the timer in 12 hours.
6.7. The lamp is ON/OFF In 1 cycle.
6.5. The lamp is ON/OFF In 1 cycle.
6.8. The timer is activated succssefully.
6.6. Press the My button approx. 2 seconds.
6.7. The lamp is ON/OFF In 1 cycle.
6.8. The timer is activated succssefully.
GB
GB