Safety Instructions - PAW DN 25 Notice De Montage

1. Safety instructions

The installation and startup as well as the connection of electrical components require technical
knowledge commensurate with a recognized vocational qualification as a fitter for plumbing,
heating and air conditioning technology, or a profession requiring a comparable level of
knowledge [specialist]. The following must be observed during installation and commissioning:
relevant local and national regulations
•
Accident prevention regulations of the Employer's Liability Insurance Association
•
instructions and safety instructions mentioned in this manual
•
NOTICE
Material damage due to mineral oils!
Mineral oil products cause lasting damage to seals made of EPDM, whereby the sealant
properties are lost. We do not assume liability nor provide warranty for damage to property
resulting from sealants damaged in this way.
 It is imperative to prevent the EPDM sealing elements from making contact with
substances containing mineral oils.
 Use silicone- or polyalkylene-based lubricants free of mineral oil, such as Unisilikon
L250L and Syntheso Glep 1 from the company Klüber or a silicone spray.
2. Change of the flow line [specialist]
Mixing valve with flow on the right
4
Supply
9937012-mub-ml – V01
Supply
Mixing valve with flow on the left
1 Safety instructions
2019/04