Online Help; External Trigger; Trigger Via Usb Interface; Trigger Via External Switch - Reiner jetStamp graphic 970 Mode D'emploi

jetStamp graphic 970

2.6. Online Help

The online help of the PCset graphic software contains further information on functions and
configuration options. To open the online help, select the menu entry Help in the menu Help
or push F1.

3. External Trigger

REINER optional accessories are available for external trigger types.
See online help for technical data.

3.1. Trigger via USB Interface

Connect REINER USB trigger cables to Micro-USB socket
f
7
Set set wheel to the desired print pattern.
f
Close contact.
f
Desired print pattern is printed.

3.2. Trigger via External Switch

Triggering via external switch uses a galvanically insulated contact.
An external voltage source is required for triggering.
Connect the REINER trigger cable to the plug-in socket for external triggering
f
7
Set set wheel to the desired print pattern.
f
Close contact.
f
The desired print pattern is printed.
9
.
10
.
GB
61