Medisana PSB Mode D'emploi page 24

GA_40410_PSB_West_aktual.qxd:Personenwaage
GB
3 Operating
3.5
Weighing and
measuring body fat,
water content and
muscle mass
20
7. Now set your age using
the UP button and/or the
DOWN button .
8. Press the ON button
the setting. The preset height on
the display starts to flash.
9. Set your height using the
UP button and/or the
DOWN button .
10. Press the ON button
the setting.
11. The setting procedure is now complete. The display of the memory
location on the display flashes another five times before the unit
switches off automatically.
The UP button and/or DOWN button
switches off to program further memory locations. Proceed as described
above and repeats steps 4 – 10.
The scales will switch off automatically if no button is pressed during the
programming sequence for approx. 18 secs.
NOTE
Reliable measurements can only be achieved under certain
circumstances, as described in "2.5 Prerequisites for correct
measuring results", p. 16.
Place the scales on a firm, hard surface. All four feet must be in contact
with the floor.
1. Press the ON button
switch on the scales. "0.0 kg"
appears on the display.
2. Select your personal memory
location (1 - 12) by pressing
the UP button and/or
DOWN button .
26.05.2009 13:25 Uhr
to save
to save
may be pressed before the unit
to
Seite 20