Telephone Audio/Navigation Audio; Switching The Confi Rmation Beep On/Off - Blaupunkt Bahamas MP46 Notice D'emploi Et De Montage

Volume
When you have fi nished making your
changes
u Press the MENU button 9 three
times.
Telephone Audio/Navigation
Audio
If your car sound system is connected with
a cell phone or navigation system, the car
sound system is muted when you "pick up"
the phone or during a voice output of the
navigation and the call or the voice output
is played back via the car sound speaker
system. For this purpose, the cell phone or
the navigation system must be connected
to the car sound system as described in the
installation instructions.
Your Blaupunkt dealer can provide you with
the information which navigation system
can be used with your car sound system.
You can adjust the volume with which you
switch on the telephone calls or the voice
output of the navigation.
u Press the MENU button 9.
u
Press the or
ly until "VOLUME MENU" appears on
the display.
u button : to open the
Press the
menu.
u
Press the or
until "TEL VOL" appears on the display.
u
Set the desired volume with the
button :.
When you have fi nished making your
changes,
u Press the MENU button 9 three
times.
10
button : repeated-
button : repeatedly
or
Note:
Using the volume control 3, you can
adjust the volume for telephone calls
and voice output directly during the
playback.
Switching the confi rmation beep
on/off
The system will output a confi rmation beep
for some functions if you keep a button
pressed down for longer than 2 seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
u Press the MENU button 9.
u
Press the or
until "VOLUME MENU" appears on the
display.
u button : to open the
Press the
menu.
u
Press the or
until "BEEP ON" or "BEEP OFF" appears
on the display.
u
Switch the BEEP ON or OFF with the
or button :.
When you have fi nished making your
changes,
Press the MENU button 9 twice.
u
button : repeatedly
button : repeatedly