Storch 140 HOT Mode D'emploi page 86

The pictorial quick reference guide
The pictorial quick reference guide is designed for helping
you when starting up, operating and storing the unit. The
guide is subdivided into 8 sections.
Operating elements
A1. Top cover release
A2. Receptacle for service crane and lifting ring
A3. Hot chimney
A4. Cable hook
A5. High pressure hose reel lock
A6. Spray lance
A7. Supply water connection
A9. Tunable cable hook
A10. Parking brake
A11. Tool box
A12. Control panel
A13. High pressure hose connection on machine
B4.a/B4.b
1)
A14. High pressure hose ree
A15. Crank handle for High pressure hose ree
A16. Place for canister for detergent
A17. Footboard for tipping product
A18. Tank filler for descaling additive
A19. High pressure hose hook
A20. Side door release
A21. Safety warning label
A22. Tank filler for fuel
A23. Spray Gun holder
A25. Fuel level view
A26. Long detergent hose for external canister
A27. Service interval due/expired LED
A28. Descaling additive low
A29. Fuel low LED
1)
A30. Pump oil low LED
1)
A31. Power ON LED
A33. Boiler overheated indication LED
A34. No flame indication LED
A35. ECO-mode indication LED
A38. Main switch with hot/cold water selection
A39. Temperature control knob
A40. Detergent metering knob
Original instruction
A
1)
1)
1)
1)
LED
1)
1)
DO READ SAFETY INSTRUCTIONS BEFORE USE!
Unpacking and preparing the unit
B1. Remove safety traps from the cleaner.
B2. Remove the hose, lance and cable from the pallet.
B4.a Machines with hose reel: Remove transportation
caps from inlet and outlet. Connect the high
pressure hose and roll it up on the hose reel and
lock hose reel on handle (A)1).
B5. Place power cord around cable hooks (A and B) and
lock the cable end at cable hook (B).
B6. Descaling additive is set at the factory to a water
hardness of Slightly Hard. See table at maintenance
section. Warning indication cancelled when set to
"0".
B7. Release the wheel brake.
B8. Lift in the handle and pull the cleaner's rear wheel
of the pallet and down to the floor.
B9. For easy tilting and maneuvering - kick the
footboard and push down on handle.
Lifting and strapping for transport
C1.a The safest way to lift the cleaner is to use a fork-lift
truck from the front or back end of the cleaner. (Not
from side!).
C1.b Use the fixing points (A,B,C) when lifting with belts.
Do not lift in or strap to the plastic parts of machine
as it could become detached from the frame.
C1.c For safe daily lifting an accessory lifting set
recommended.
C2. Use the fixing points (A,B,C) when securing with
belts for transportation. Do not lift in or strap to the
plastic parts of machine as it could become
detached from the frame.
86
B
C
is
1)
Optional accessories
1)