Suntec Wellness Klimatronic IMPULS 2.0 Eco R290 Mode D'emploi page 16

Power
1
+ (Up)
2
– (Down)
3
Sleepmode
4
High vwntilation level
5
Low ventilation level
6
Functions
Cooling mode
•
After starting the Unit it will automatically start with default settings: cooling mode, low fan speed.
•
Press the MODE button to set the cooling mode, the cooling mode indicator lights.
•
Press the ▲ or ▼ to adjust to the temperature (16°C – 31°C).
•
Press the FAN button to adjust the fan speed (high or low).
Fan mode
•
Press MODE button to turn on the fan mode, the fan mode indicator lights.
•
Press the FAN button to adjust the fan speed (high or low).
•
Temperature setting and sleep mode cannot be set.
Timer
•
In standby mode, press the TIMER button to set the on-time. The timer indicator lights up.
•
After starting the unit press the TIMER button to set the off-time. The timer indicator goes off.
Dehumidifying mode
•
Drücken Sie die Taste MODE, um den Entfeuchtungsmodus einzustellen, der Entfeuchtungsmodus-
Indikator leuchtet.
•
Temperatureinstellung und Schlafmodus können nicht eingestellt werden, die Geschwindigkeit des
Ventilators bleibt automatisch niedrig.
Sleep mode
•
Press the SLEEP MODE button, the fan speed will be automatically adjusted on the low level.
•
If the sleep mode will be activated during operation in the cooling mode, the temperature will rise an
hour later by 1°C, two hours later by another 1°C and then remains constant.
•
Sleep mode is not adjustable during dehumidifying and fan mode. If the water tank is full, the standby
mode will switch on, settings will be deleted and the sleep mode will be disable.
Special functions
Compressor protection
•
The compressor requires a start-up phase and will start three minutes later after turning on / reboot the
device.
Frost protection
•
In cooling, dehumidifying and sleeping modes, the unit has an automatic frost protection function
designed to protect the unit at low temperatures. The device also has an automatic defrosting function.
7 Ventilationmode
8 Dehumidification mode
9 Cooling Mode
10 LED Display
11 "Watertank full" indicator
12 Timer