Electrolux IK 3025 Notice D'utilisation page 52

Fasten the appliance with 4 screws provided in the
kit included with the appliance.
(I = short) (P = long)
I
P
Apply the sealing strip pushing it between the
refrigerator and the adjacent cabinet.
D724
Apply covers (C-D) on joint cover lugs and into hinge
holes.
Snap vent grille (B) and hinge cover (E) into
C
position.
D
E
B
Separate parts Ha, Hb, Hc, Hd as shown in the
figure.
Hb
Ha
Hc
Hd
PR266
ca. 50 mm
Place guide (Ha) on the inside part of the furniture
door, as shown in the figure and mark the position of
90°
external holes. After having drilled holes, fix the
guide with the screws supplied.
ca. 50 mm
52