Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Instructions for totally built-in
appliances
Dimensions of the recess
Height
(1)
Depth
(2)
Width
(3)
The appliance's door has been locked in position
for transport by means of pins on both sides. Ac-
cording to the door opening direction, remove
relevant pins at the top and at the bottom.
For safety reasons, minimum ventilation must be as
shown in Fig.
Attention: keep ventilation openings clear of ob-
struction.
Furthermore, it is necessary that the niche is provid
with a conduct of ventilation having the following
dimensions:
depth
50 mm
width
540 mm
Drill the unit using a Ø 2.5 mm drill (10 mm max.
penetration);
Fix the square fitting to the appliance.
Fit the appliance in the niche by making sure that it
stands against the interior surface of the unit on the
side where the door hinges of the appliances are
fitted. Insert the appliance until the upper strip butts
up against the unit (1) and make sure that the lower
hinge is in line with the surface of the unit (2).
1780 mm
550 mm
560 mm
min.
50 mm
2
200 cm
D567
3
2 1
PR01
13mm
Ø 2,5
D740
D022
min.
200 cm
2
2
51
Publicité
Table des Matières
