Setting The Time; Setting The Alarm; Turning The Alarm On/Off - LENCO CR-580BK Guide D'utilisation

Setting the time

1. Short press TIME. Hours display will start to blink.
2. Set the hour by pressing – or +.
3. Short press TIME again to make the minute blink.
4. Set the minute by pressing – or +.
5. Short press TIME or wait 15 seconds to show the current time.
6. Long press TIME to set up 12/24H mode.
DST (Daylight saving time)
To change the clock time by +1/-1, hour press and hold the snooze button for 3 seconds
Note: the DST option cannot be used in FM mode
Changing the temperature indication on the display
To change the temperature indicator from Fahrenheit to Celcius, short press the + and - button
simultaneously.

Setting the alarm

1. Short press the ALARM button once to make the hour blink.
2. Press the – or + buttons as needed until the desired alarm hour is shown on the display.
3. Short press ALARM again to make the minute blink.
4. Set the minute by pressing – or +.
5. Press the ALARM button to save the time and select the BUZZER/RADIO.
NB: If you select Radio, the last used station and volume level will be used.
6. Short press ALARM or wait 15 seconds to exit alarm set up and return to the current time.
Snooze
1. When the alarm is activated, Press the SNOOZE button to snooze for 9 minutes. Or press the ALARM
button to cancel the alarm for 24hrs.
2. When the alarm sounds, press ALARM to cancel snooze.

Turning the alarm on/off

1. Long press ALARM, the alarm icon will display, meaning the alarm is activated.
2. Long press ALARM again, the alarm icon will disappear. The alarm is now off.
8